| General parameters |
| Type |
ZENITH X ST | ZENITH X DT |
| Band |
6 | 11 | 13 | 18 | 23 GHz |
| Duplex spacing (MHz) |
160, 252.04, 340 | 490, 530 | 225, 266 | 1010, 1560 | 1008, 1200, 1232 |
| Channel bandwidth (MHz) |
7 – 224 MHz/240 MHz |
| Modulation scheme |
QPSK - 4096 QAM |
| Transmission capacity |
up to 7.6 Gbps full-duplex for 2x(2+0 XPIC) with 2xZENITH DT |
| |
up to 1.9 Gbps full-duplex (Single ZENITH ST) |
| |
up to 3.8 Gbps full-duplex (Single ZENITH DT) |
| Frequency stability |
< 10 ppm |
| Forward error correction FEC |
Reed-Salomon |
| System configurations |
1+0, 1+0 SD, 1+0 FD, 2+0 SD, 2 x (1+0), 2+0 ACAP/ACCP, 4+0 ACAP/ACCP, 1+1, 2+2, 2 x (2+0 XPIC), 2x2 MIMO, 4x4 MIMO |
| Radio Parameters |
| Transceiver |
ZENITH X ST - single transceiver, dual sub-carriers; ZENITH X DT - double transceiver, each with dual sub-carriers |
| Output power max. (dBm) |
up to +27 based on modulation used |
| Automatic power control |
ATPC, RTPC, Advanced Digital Pre-distortion |
| ACM |
Hitless ACM |
| User interfaces |
| Ethernet interfaces DT |
1× GEth RJ45 (PoE), 1× SFP or 1× SFP + 2× SFP+ port |
| Ethernet interfaces ST |
1× GEth RJ45 (PoE), 1× SFP or 2x SFP port |
| Maximal packet length |
16000 bytes |
| Management and Features |
| Management |
Web interface, SNMPv2/v3, SSH, Telnet, USB/WiFi service access |
| Supports |
SyncE, PTP1588v2, 802.1q (VLAN tagging), 802.1p (priority queuing), 802.1ad (Q-in-Q ), G.8031, G.8032, G.8131, G.8132 |
| |
Connectivity Fault Management (CFM), per IEEE 802.1ag; Ethernet OAM, per ITU-T Y.1731; · Ethernet in the First Mile OAM, per IEEE 802.3ah |
| |
Ethernet Local Management Interface (E-LMI), per MEF (Metro Ethernet Forum), Syslog, Radius |
| ODU connection |
| Cable type |
S-STP/S-FTP Cat. 7 cable up to 100 m length, optical fiber |
| Cable length |
Up to 90 m for Ethernet 1000Base-T, up to 100 m for 100Base-TX and up to 250 m for 10Base-T |
| Optical cable |
Fibre optic cable is determinated by used SFP module |
| Antennas |
| Interface |
Standard RBWN/CTT |
| OMT |
Built-in replaceable (DT) or external (ST) |
| Class |
ETSI Class 2 or Class 3 |
| Polarization |
Vertical or horizontal / Dual polarization |
| Power supply |
| Power supply |
36 – 60 VDC, PoE or direct |
| Environmental |
| Operating temperature (Outdoor unit) |
-33 to +55 °C |
| Ingress protection |
IP67 / All Weather |
| Dimensions and weight |
| Dimensions (cm) |
23 × 22.5 × 11.4 (ST), 22.6 × 22.1 × 11.6 (DT) |
| Weight (kg) |
6.1 (ST), 9.2 (DT) |
